8010 Series Universal Male Tip
8010 Series Universal Male Tip
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.
QUICK RELEASE COUPLERS - 1/2" (for other than 1/2" See Below)

8010 SERIES UNIVERSAL MALE TIP
The standard male tip of the agricultural industry, developed and proved by Pioneer in over 40 years of farm service.

  • Has rugged, reliable ball valve and induction-hardened locking ball groove to prevent brinelling and prolong life.
  • Shielded valve plus valve stop eliminates flow checking when used with connect-under-pressure type female bodies.
  • Tapered hex design makes identification easy after years of use.

Part no. BP8010-4

½" NPT Thread

Std "BALL" type

Also Avail.

Part no. BP8010-4P

Poppet (pin type) ½" NPT thread

MALE TIP STANDARDIZATION
8010 Series male tips meet ASAE #S366, SAE # J1036, and I.S.O. #5675 standard requirements.
These engineering societies have established the following specifications for agricultural male tips
:
  • Physical Dimensions. Critical dimensions are to be specified :
    • 1) from the nose of the tip to the locking ball groove,
    • 2) from the locking ball groove to the shoulder where the hex begins,
    • 3) diameter of the nose portion, and
    • 4) valve location in both open and closed position.
  • Valve Spring Force. The force required to push the valve to the flush position is not to exceed 10 lbs.
  • Maximum Pressure Drop. The pressure drop at a flow of 16 GPM is not to exceed 25 PSI.
  • Rated Working and Burst Pressure. The rated working pressure must be a minimum of 3000 PSI. The burst pressure must be a minimum of 10,800 PSI.

All standards are established around male tips.

Female bodies should be designed to accept an industry standard male tip. All Pioneer female bodies having ½" body size designed for agricultural use will accept such a standard male tip.

QUICK RELEASE COUPLERS (other than Standard ½" N.P.T.F.)
FEMALE QUICK RELEASE COUPLER
PART NUMBER
THREAD
SIZE
COUPLER
SIZE
ACROSS
FLATS
BP4050-2
¼" NPFT
¼"
¾"
BP4050-3
3/8" NPFT
3/8"
1 5/16"
BP4050-5
¾" NPFT
½"
1 1/8"
BP4150-5
¾" NPFT
¾"
1 3/8"
BP4050-6P
1" NPFT
1"
1 5/8"
BP4050-15
¾ x 16 O-Ring
½"
1 1/16"
BP4050-16
7/8" x 14 O-Ring
½"
1 1/16"
MALE TIP
PART NUMBER
THREAD
SIZE
COUPLER
SIZE
HEX
SIZE
BP4010-2
¼" NPFT
¼"
¾"
BP4010-3
3/8" NPFT
3/8"
1 5/16"
BP8010-5
¾" NPFT
½"
1¼"
BP4110-5
¾" NPFT
¾"
1¼"
BP4010-6P
1" NPFT
1"
1 5/8"
BP8010-15
¾ x 16 O-Ring
½"
1 1/16"
BP8010-16
7/8" x 14 O-Ring
½"
1 1/16"
NON STANDARD ORIGINAL EQUIPMENT COUPLERS

BP4056-4 -½" N.P.T.F.
Fits JD

BP4057-4 -½" N.P.T.F.
Replaces
IHC 544787R1

NOT AVAILABLE (Obsolete)
Replace with ISO/ASAE Std
Coupler from previous page

NOT AVAILABLE
Replace with ISO/ASAE Std
Coupler from previous page

NOT AVAILABLE
Replace with ISO/ASAE Std
Coupler from previous page

BP5060-4 -½" N.P.T.F.
Replaces JD
RE-11447

J.D.

BP5070-4 -½" N.P.T.F.
=IHC 1272770
BP5070-16 -7/8" x 14 O-Ring
=IHC 544787R91

I.H.C.

BP5077-4 -½" N.P.T.F.
=IHC 395151R1
BP5077-16 -7/8" X14 O-Ring
=IHC 395149R1

I.H.C.

B3735 - ½" BSP
Replaces FORD D3NN-B964A

FORD

BP5080-4 -½" N.P.T.F.
Replaces CASE A160884

CASE

8010 Series Universal Male Tip