Wide Angle CV Shafts

POWER
RATING

SHAFT SERIES

SHAFT LENGTH
CROSS TO CROSS

PART No.

DESCRIPTION

35hp
4 series

W2380 SERIES

Non wide angle end yoke
= standard BARE-Co 4 series

Closed 39"
Open 65"

WB4105

1 3/8" x 6 spline both ends triangle profile drive tube

64hp
6 series

W2480 SERIES

Non wide angle end yoke
= standard BARE-Co 6 series

Closed 39"
Open 65"

WB6105

Closed 59"
Open 98"

WB6150

106hp
2580 series

Heavy Duty Version
Star Profile Drive Tube
W2580 SERIES

Non wide angle end yoke
= standard BARE-Co/ WALTERSCHEID 2500 series

Closed 39"
Open 65"

WW36105

1 3/8" x 6 spline both ends star profile drive tube

Closed 59"
Open 98"

WW36150

Closed 39"
Open 65"

WW3610521

1 3/8" x 21 spline both ends star profile drive tube

WW3610520

1 3/4" x 20 spline both ends star profile drive tube

Closed 52"
Open 81"

WE36130

1 3/8" x 6 spline yoke on wide angle end.
No end yoke on the plain end.
Will accept standard yoke from End Yoke Page
Star profile drive tube.

WE3613020

1 3/4" x 20 spline yoke on wide angle end.
No end yoke on the plain end.
Will accept standard yoke from End Yoke Page
Star profile drive tube.

WE3613021

1 3/8" x 21 spline yoke on wide angle end.
No end yoke on the plain end.
Will accept standard yoke from End Yoke Page
Star profile drive tube.

WARNING !
Exceeding 80 degree angle will result in joint ball / socket FAILURE ! (NOT COVERED BY WARRANTY) Tractor turning limiter should be fitted to the implement drawbar