Engine Kits and Components
For: M.F. Tractors with Perkins A4-236 engines

Now available with a NEW CRANKSHAFT for little more than a basic regrind for most applications
3 KIT LEVELS
"EK" - FOR IN-FRAME REPAIR. Includes - Pistons, Wrist Pin Bushes, Piston Rings, Liners, Con Rod Bearings, Con Rod Lock Nuts (where fitted), Top & Bottom Gasket Sets.

"EKM" - FOR OUT OF FRAME REBUILD. Includes ALL of the above PLUS - Main Bearings (you specify under-size required at NO EXTRA COST), Thrust Washers, Front & Rear Seals.

"EKMC" - same as EKM but INCLUDING A NEW CRANKSHAFT
IMPORTANT
To reduce your Inventory levels, Bare-Co lists VALVE TRAIN KITS separately below the Engine Kit Part Numbers. Valve Train Kits will fit a range of different engine kits.
The Bare-Co QUALITY DIFFERENCE
Semi-finished liners are a no-charge option for most models.
Viton Rear Seals are supplied for most applications
No extra for under-size bearings
The EKMC Kit allows for INSTANT ASSEMBLY with a NEW CRANKSHAFT and Standard Bearings straight out of the box.
APPLICATION
ENGINE
KIT
VALVE
TRAIN
SET
PISTON/ LINER KIT
(1 CYL.)
RING SET
(1 CYL.)
PISTON
LINER
FINISHED
LINER SEMI
FINISH
A4-236 engine
MF175, 180
ROPE TYPE REAR SEAL
SHORT PISTON
ie. up to eng. 236UA103063
3 7/8" bore

 
EK16
EKM16
Fits both Rope & Lip Seal

EKMC16
 Rope Seal
Crankshaft
INCLUDED

Standard
= VK6

0.003" O/size
= VK7
B2147
B2620
=836583M91
41158041
B6147
=735187M91
82878
Compression Height
= 2.752"
Length
= 4.75"

B7543
=736507M3
31358441
31358394

[Flanged Liner]


O.D. = 4.055"
B7547
31358324
31358393

A4-236 engine
MF175, 180, 265
 LIP TYPE REAR SEAL
SHORT PISTON
from eng.236UA103064L to eng. No. 236UA109214L
MF174, 184 LANDINI up to 236UA110047L, 3 7/8" bore

EK16
EKM16
Fits both Rope & Lip Seal

EKMC1610
Lip Seal
Crankshaft
INCLUDED

A4-236 Non Turbo Engine
LONG PISTON
THIN WALL LINER
3 7/8" bore
MF175, 265 from 236UA109215L
MF174, 184 from UA110047L
MF255 with eng. no. prefix 236UA
MF274

Early 362, 365, 374, 375, 384, 393, 670, 3050, 3070
All with 4.055" OD liner
Confirm Liner O.D.

EK49
EKM49
EKMC49

Standard
= VK6

0.003" O/size
= VK7
B367
B7551
=68301
743110M91
Compression Height
=2.789"
Length
= 4.77"

A4-236 Non Turbo Engine
HEAVY WALL LINER
3 7/8" bore
Late 362, 365, 374, 375, 384, 393, 670, 3050, 3070
All with 4.106" OD liner
Confirm Liner O.D.
EK47
EKM47
EKMC47

Standard
= VK6

0.003" O/size
= VK7
B368
B7545
=3135X032
3637332M1
Flanged Liner with large O.D. 4.106"
To fit A4-248 type eng. block
B7546
=3135X031
3637331M1
Flanged Liner
Engine Kits and Components
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.