Engine Kits and Components
MF tractors with PERKINS 3 Cyl Diesel engines & STANDARD MOTOR Co. 4 Cyl Diesel

Now available with a NEW CRANKSHAFT for little more than a basic regrind for most applications
3 KIT LEVELS
"EK" - FOR IN-FRAME REPAIR. Includes - Pistons, Wrist Pin Bushes, Piston Rings, Liners, Con Rod Bearings, Con Rod Lock Nuts (where fitted), Top & Bottom Gasket Sets.

"EKM" - FOR OUT OF FRAME REBUILD. Includes ALL of the above PLUS - Main Bearings (you specify under-size required at NO EXTRA COST), Thrust Washers, Front & Rear Seals.

"EKMC" - same as EKM but INCLUDING A NEW CRANKSHAFT
IMPORTANT
To reduce your Inventory levels, Bare-Co lists VALVE TRAIN KITS separately below the Engine Kit Part Numbers. Valve Train Kits will fit a range of different engine kits.
The Bare-Co QUALITY DIFFERENCE
Semi-finished liners are a no-charge option for most models.
Viton Rear Seals are supplied for most applications
No extra for under-size bearings
The EKMC Kit allows for INSTANT ASSEMBLY with a NEW CRANKSHAFT and Standard Bearings straight out of the box.
New Injector Kits at Repair Prices
APPLICATION
ENGINE
KIT
PISTON/ LINER
(1 CYL.)
RING SET
(1 CYL.)
PISTON
LINER
FINISHED
LINER SEMI
FINISH
4 Cylinder DIESEL 23C Eng.
3 5/16" bore
MF35 4 Cyl. Diesel
EK4
EKM4
B2144
B2617
B6144
=1884101M91
B7539
=1884940M1
N/R
A3-152 3 Cylinder DIESEL
Regular (INDIRECT) Injection
CHROME LINERS
Identify by: Vertical Injectors
 0.040" Deep Liner Flange
Flat Top Pistons
3.6" Bore
MF35, MF50 3 Cyl
Up to engine no. CL1935853

EK5
EKM5
EKMC5

Valve Train Kit
VK1
B2631
B2633
[Fit chrome bore]
=41158058
745819M1
B6145
=81512
734460M91
B7540
=31358308
732638M1
N/A
A3-152 3 Cylinder DIESEL
Regular (INDIRECT) Injection
CAST LINERS
Identify by: Vertical Injectors
0.150" Deep Liner Flange
Flat Top Pistons
3.6" Bore
MF35, MF50 3 Cyl
From engine no. 1935854
EK6
EKM6
EKMC6

Valve Train Kit
VK1
B2145
B2619
=836325M91
41158057
745818M91
B7541
=31358345
739043M1
Flanged Liner
 B7550
=31358323
734179M1
[Std press fit]

 

B8550
[.030" oversize OD.]
AD3-152 3 Cylinder DIESEL
DIRECT Injection
ROPE TYPE REAR SEAL
Identify by: Inclined Injectors
Bowl Top Pistons
3.6" Bore
MF135, MF150, MF235
Up to engine no. 152UA391045D
EK7
EKM7
EKMC7

Valve Train Kit
VK2
New Injector Kit
IJK1
B2146
B6146
=68332
743824M91
AD3-152 3 Cylinder DIESEL
DIRECT Injection
Identify by: Inclined Injectors
LIP TYPE REAR SEAL
5 Ring Piston
3.6" Bore
MF135, MF230, MF235, MF240
From engine no. 152UA391046DL
NOTE: BLOCKS available for this engine - see AD3-152 BLOCKS
EK7
EKM8
EKMC8

Valve Train Kit
VK2
New Injector Kit
IJK1
AD3-152 "S" 3 Cylinder DIESEL
ROPE TYPE REAR SEAL
4 RING PISTON
MF148, MF235, MF245
Up to eng. no. 152UA391046DS
EK9
EKM9
EKMC9

Valve Train Kit
VK3
 B5098
 B5099
=41158065
745826M91
B6098
=89214
742621M91  
AD3-152 "S" 3 Cylinder DIESEL
LIP TYPE REAR SEAL
4 RING PISTON
3.6" Bore
MF148, MF235, MF245
From engine no. 152UA391046DLS
MF250, MF550
MF154, MF254 (Landini)
NOTE: BLOCKS available for this engine - see AD3-152 BLOCKS
EK9
EKM9
EKMC910

Valve Train Kit
VK3
AD3-152 "S" 3 Cylinder DIESEL
LIP TYPE REAR SEAL
4 Ring Piston
3.6" Bore
FLANGELESS LINER
MF353S (Landini)
EK46
EKM46
EKMC46

Valve Train Kit
VK3
B317
Flangeless
Liner
B313
=31358356
3637492M1
Engine Kits and Components
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.