Steering - Axle Support 2 W/D
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.
U.S. MODELS

Ref.
Part No.
Replaces
Description
Application
1
B932
183221M1

Axle Pivot Pin 5 1/8" Long
(7/8" dia Bolt Hole)

TO30, TO35, FE35, MF35
MF135 up to s/n 9A86902 (Radius Rod Axle Beam)
B930
183223M1
825002M1
Axle Pivot Pin 4 1/8" Long
(9/16" dia Bolt Hole) 		TO20, TE20,
Imported U.K. TEA20
2
B934
180344M1

Thin Wall Split Bush
1 15/16" OD x 1 3/4" ID

TO20, TE20, TEA20, early TO30
3
B933
182850M1

Flanged Axle Pivot Bush
2.075" OD

Late TO30, TO35, MF35,
Early MF 135, 2135 (Radius Rod Axle)
4
B2412
1670939M1
Axle Pivot Pin MF135 from s/n 9A86902 (Straight Axle Beam, no Radius Rods)
MF135 Vineyard,
MF235, 245
5
B2413
1660114M2
Axle Pivot Bush
6
B2153
353623X1

Axle Beam Bolt

TO20, TO30, TO35, FE35, MF35,
TE20,
MF135 (with Radius Rod Axle Beam)
7
B2152
353643X1

Radius Rod Bolt
8
B2154
353427X1

5/8" UNF Nut
9
B3779
897235M1
194624M1
Bush for Main Steering Shaft (2 req) MF165, 175
10
B6799
510896M1
898359M2
1676665M1
Main Steering Shaft Tractors with Forged (Clamp-on) type lower center arm for tie rods
ie. MF165 from ser. no. 643003510 to 643011388
     MF175 from ser. no. 644000638 to 644002127 Gas & Diesel
11
B1688
194567M92
 Steering Arm
12
B1689
510336M92
 Lower Center Arm for Tie Rods For tractors with Forged (Clamp-on) type lower center arm as above except...
... for the following tractors you must also order: B6799 Shaft; B2153 Bolt and B2154 Nut
MF165 prior to ser. no. 643003510 and...
MF175 prior to ser. no. 644000638
13
B2153
353623X1
 5/8" x 3" Bolt For Late Type Steering Shaft shown above
14
B2154
353427X1
 5/8" UNF Nut
15, 16, 17, 18, 19, 20, 21, 22, 23
See imported models - click below
Steering - Axle Support 2 W/D