Steering - 2WD Hydrostatic
See below for U.S. Models
Steering - 2WD models (Hydrostatic Steering ) - NO DRAG LINK. Single Ram.
Early type Tie Rod as illustrated (locating bolts through center tube)

Ref.
PART No.
REPLACES
DESCRIPTION
APPLICATION
1
B5550
AL37202
(AL33038)
PISTON ROD
Fits Early Cylinders with port in Ram head (not in ram tube)
Models as shown below
2
B5551

 
WELD ON BALL END
for Piston Rod
2040
3
B5552

 
WELD ON BALL JOINT
(Fixed End)
4
B5553
L36085
(L35227)
RAM PIN
25mm x 1 5/8"
5
B5554
AL31498
TIE ROD END
6 Cross Holes as illustrated
Above (Early) Models with cross drilled tie rod.
For Late type notched shank tie rod use weld-on ends - shown below.
6
B5555
AL31497
TIE ROD END
24mm diameter thread
7
B5556

 
WELD ON BALL END
Above models with early or late tie rod.
8
B5557
L36086
PIN ( TIE ROD)
25mm x 3"
U.S. Models
APPLICATION
OUTER ROD END
INNER ROD END
3010, 3020, 4010, 4020, 4320
B5528
12" long 3/8" Holes
= AR51584
B5529
7/8" R.H. Thread
= AR27351
4030, 4230, 4430, 4040, 4240
4440, 4050, 4250, 4450
B5530
1" diameter 8 Holes
= AR63592
B5531
7/8" R.H. Thread
= AR63588
Steering - 2WD Hydrostatic
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.