CASE - I.H. Linkage

CASE - I.H. Hitch Parts

NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.

ECONOMY
(1 1/8" UNC)
Most popular to 45HP

HEAVY DUTY
(1 1/4" UNC)
Recom. for Rippers etc.

JUMBO
(1 3/8" UNC)
THE ULTIMATE!

SUPER TOP LINK
(2" UNC)
HEAVY DUTY - ALL
APPLICATIONS

HYDRAULIC TOP LINK
(1 3/8" UNC)
SEE HYDRAULIC SECTION

Ref.	PART No.	REPLACES	DESCRIPTION	APPLICATION
1	B8113	HYDRAULIC TOP LINK See Hydraulic Section		ALL MODELS
3	B315		CAT 1 - 2 STANDARD TOP LINK 1 1/8'' UNC.	B 250 through 785 Standard duty use
4	B1		CAT 2 HEAVY DUTY LINK 1 1/4'' UNC.	474 upwards Heavy duty use (Ripping etc)
5	B2660		CAT 2 JUMBO LINK CAT 2 PINS 1 3/8'' UNC.	Large U.S. Models
5	B2417		CAT 3 JUMBO LINK 1 3/8'' UNC.	Large U.S. Models CAT 3 (1 1/4'' diameter pins)
6	B4417		CAT 3 SUPER TOP LINK 2'' UNC.	CAT 3 Heavy Duty Applications

7	B111	704183R1	SPECIAL CAT 1 TOP PIN	ALL MODELS with Stepped top pin i.e. B 250 through 885
7	B110	704182R1	SPECIAL CAT 2 TOP PIN	ALL MODELS with Stepped top pin i.e. B 250 through 885
8	B76		STANDARD CAT 2 (1'' diameter) TOP PIN	Both ends U.S. CAT 2 Tractors
	B75		STANDARD CAT 1 (3/4'' diameter) TOP PIN	Implement end CAT 1 applications
	B2597		STANDARD CAT 3 (1 1/4'' diameter) TOP PIN	CAT 3 Tractors
9	B353		3/4'' - 1'' CONVERSION BUSH	Reduces CAT 2 Top link to CAT 1
9	B519		1'' - 1 1/4'' CONVERSION BUSH (TOP)	Reduces CAT 3 Top link to CAT 2
10	B328	CAT 1	WELD ON BALL END 7/8'' HOLE	AS REQUIRED
	B329	CAT 2	WELD ON BALL END 1 1/8'' HOLE
	B2591	CAT 3	WELD ON BALL END 1 7/16'' HOLE
11	B121	751764R1	CAT 1 HEAVY DUTY LINKAGE DRAWBAR	AS REQUIRED [ Standard 66cm inside length]
	B124		CAT 2 HEAVY DUTY LINKAGE DRAWBAR	AS REQUIRED [ Standard 66cm inside length]
	B2722		CAT 2 (LONG) DRAWBAR	EXTRA LONG (76cm inside length)
12	B351		7/8'' - 1 1/8'' CONVERSION BUSH	CAT 1 - 2 - 3 CONVERSION as required
12	B529		1 1/8'' - 1 7/16'' CONVERSION BUSH	CAT 1 - 2 - 3 CONVERSION as required
13	B7318	STABILISING CHAIN 13 3/8" - 16 1/2" (34 - 42cm) Special Design fits 3/4'' + 7/8'' diameter Lower Link Mount hole		B 275, 454, + ALL 74, 84, 85 & 95 series
LEVELLING BOX ASSEMBLIES (COMPONENT PARTS DIFFER FROM ORIGINAL EQUIPMENT)
14	B579	STANDARD DUTY LEVELLING BOX - adjust 19" - 27" (48 - 69cm)		B 250, B 275, 414, 434, 444, 384
	NOTE: World Wide Series tractors (474 through 895) use TWO DIFFERENT LENGTHS combined with TWO DIFFERENT WIDTHS for Lower Fork Slots i.e. 4 COMBINATIONS: PLEASE SELECT UNIT REQUIRED FROM DIMENSIONS BELOW.
	PART No.	DESCRIPTION	FORK WIDTH	ADJUST RANGE
	B2661	HEAVY DUTY LEVELLING BOX	17mm (11/16")	" A " = 56cm - 67cm (22" - 26")
	B7321		40mm (1 1/2")	" A " = 56cm - 67cm (22" - 26")
	B5211		17mm (11/16")	" A " = 63cm -78cm (25" - 30")
	B7322		40mm (1 1/2")	" A " = 63cm -78cm (25" - 30")
15	B408 B404 B405 B410 B412 B415 B416 B417	DRAWBAR PIN	Dia. x Effective Length 3/4'' x 3 3/4'' 3/4'' x 6 1/4'' 7/8'' x 6 1/4'' 1'' x 6 1/4'' 1 1/8'' x 6 1/4'' 1 1/4'' x 6 1/4'' 1 3/8'' x 7 1/4'' 1 1/2'' x 7 1/4''

CASE - I.H. Hitch Parts

NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.